Issue time:2022-02-23 09:44:07 source:安珂地垫 views:3461

Anti-static floor mats will inevitably be damaged after long-term use, and there is more than one cause of damage and damage. For this situation, is it necessary to replace the mat with a new one, but also choose to repair it? We must first distinguish which damage can be repaired, which damage must replace the entire anti-static mats, and then discuss which repair method is appropriate.

　　Situation 1: It does not necessarily need to be repaired. For example, an anti-static floor mat is completely penetrated from top to bottom with a very small hole that is negligible. If it is a scratch, it is recommended that it be reinforced with glue and does not need to be repaired. If you are not sure, you can test its anti-static performance, and if the performance is good, it will not be replaced.

　　Case 2: If the hole formed is larger, or burned by high temperature, or corroded by strong acid and alkali, regardless of whether there is a hole, as long as the anti-static floor mats are found to be defective or flawed, it is recommended to discard the anti-static floor mats here and replace them with new anti-static floor mats. Many users feel that after such a failure is just a hole, it does not matter, it is proven that at this time the anti-static floor mats anti-static performance has been greatly reduced. It should be noted that, in order to ensure the reliability of the grounding after repair, it is best to expose a section of grounding copper foil, that is, to ensure that the new anti-static floor mats can directly contact the grounding copper foil to achieve anti-static purposes.

　　Situation 3: If there is a crack or discoloration, and obviously not caused by external forces, it indicates that the anti-static floor mats rubber aging failure, regardless of the size of the crack area, the entire mat should be removed, laying a new one, at this time, you can choose the same batch of anti-static floor mats to ensure the integrity of the mat. Even if not uniformly replaced, only part of the replacement of floor mats, after laying, must also be tested again to prevent failure. Of course, whether repair or replacement, should be checked after the completion of its anti-static effect to ensure the effectiveness of anti-static floor mats.

　　Anti-static floor mats are widely used in the electronic environment, the purpose is to eliminate static electricity in the environment, to provide a safe environment for the production of electronic products and human work, so you need to pay attention to the integrity and safety of the mats, once the mats are damaged, it is necessary to immediately check the damage to the mats, and according to the above several situations, choose the appropriate treatment measures.

Tag： Floor rubber padAnti static rubber padAnti static floor matmats